Images are representations only.
ESwitch Power Switch
Brand: EurothermESwitch is an interesting solution to solve this problem. Because the contact is electronic, the lifetime is significantly extended. Its wiring is as simple as for a mechanical contactor and the mounting is very easy: just clip it on a DIN rail! It features a broad range of AC and DC command signals with a front face LED to display the input status to help commissioning and diagnostics.
Features- Easy
- No configuration
- Simplified installation
- Global standardisation
- Robust
- Reduce maintenance costs
- Reduce downtime
- Reliable operation
- Safe
- Partial Load Failure alarm
- Heating circuit dysfunction prevention
- Red light PLF detection
Specifications
Brand
Approvals & Certifications
- CCC
- CE: EN 60947-4-3 & EN 0947-1
- cUL: UL60947-4-1 & UL60947-1
- EMC Directive 2004/108/EC, Emissions & Immunity: EN 60947-4-3:2000, EN 60947-4-3:2000, A1:2006, EN 60947-4-3:2000, A2:2011
- LVD 2006/95/EC
- RoHS
- UL
Current
- Logic DC (LGC): 10-20 mA DC (ON> 8 mA, OFF< 0.5 mA)
- Nominal Current: 16-50 A
Display
- Red Indicator Light (LEDs)
Electrical Connectors
- Minimal Connection: Pre-Wireable Plug in Connector for the Input
- Power Terminals, Safety Earth Screw Terminal: 1.5 to 16 mm²
- Safety Earth Screw Terminal
Environmental Protection
- IP20, According to EN 60529
Frequency
- 47 to 63 Hz
Humidity
- 5 to 95% Relative Humidity, Non-Condensing
Input
- High Voltage Ac: 100-240 Vac
- Logic Dc Input: 5-32 Vdc
- Low Voltage Ac 48 Vac
Media
- Atmosphere: Non-Conductive
- Atmosphere: Non-Corrosive
- Atmosphere: Non-Explosive
Mounting
- DIN Rail
Operating Temperature
- 0° to 45° C (32° to 113° F) without Derating
Storage Temperature
- -25° to 70° C (-13° to 158° F), Maximum
Torque
- Power Terminals of Tightening Torque: 2.3 Nm (20.35 In/Lbs)
Voltage
- Logic Ac (HAC): 85-264 Vac (ON> 85 V, OFF< 10 V)
- Logic Ac (LAC): 30-55 Vac (ON> 30 V, OFF< 5 V)
- Logic Dc (LGC): 5-32 Vdc (ON> 5 V, OFF< 2 V)
- Nominal Voltage: 100-500 V (10% / -15%)
